Description:
Compression Conversion Pieces are a convenient method of transferring from a threaded piping system to a compression piping system or visa versa. On one side is either a male or female thread in the size range ½” through to 2” BSP and on the opposite side is a spigot of the same size corresponding Irish copper tube sizes to I.S 238. A typical application were one of these conversion pieces might be used is for connecting to a boiler or when drawing off from a copper cylinder.
 |
Features:
- Spigot sizes from 1/2" to 2" IS EN 105
- Threaded sizes from 1/2" to 2" BSP
- Enlarged Sealing Faces
- Suitable for use with any compression fittings
- Not suitable for use with Push-Fit Fitting
|
| |
|
| Technical Data: |
|
| |
|
| Fitting Material: |
Brass – CW617N |
| |
|
| Fitting Sizes: |
1/8” - 2” BSP |
| |
|
| BSP Threads Conform to: |
ISO 7-1 or ISO 288-1 |
| |
|
| Surface Finish: |
Sand Blasted |
| |
|
| Maximum Temperature: |
90°C |
| |
|
| Minimum Temperature: |
0°C |
| |
|
| Maximum Pressure: |
10 Bar |
