Description:
Tectite Irish Size fittings are ideal for the fast, efficient jointing of plain or chrome plated copper tube to BS EN 1057 or PB and PEX plastic pipe to BS 7291 Parts 2 and 3. Tectite fittings simply push together in seconds to create a perfect joint. The heat free principal of the jointing process is one of the major benefits of the Tectite system resulting in an uncontaminated installation fitted in a fraction of the time taken using other jointing techniques. Tectite fitting are suitable for use on copper and PEX pipe conforming to Irish sizes but careful attention must be paid when preparing the pipe to be inserted into the fitting; a pipe cutter must be used to insure the seal is not damaged when the pipe is being inserted. Tectite fittings are available in ½”, ¾” & 1” Irish sizes.
 |
Features:
- Full Bore
- Heat Free Installation
- Compatible with Copper & Pex
- Fully Demountable
- Irish Sizes from ½” to 1"
- Conform to EN 1254-6
- WRAS approved
- Above Ground Use Only
|
| |
|
| Technical Data: |
|
| |
|
| Fitting Material: |
Brass |
| |
|
| O-ring Material: |
EPDM |
| |
|
| Grab Ring Material: |
Stainless Steel |
| |
|
| Irish Size Fittings: |
½” to 1" Irish Pipe |
| |
|
| Maximum Temperature: |
95°C (see table below) |
| |
|
| Minimum Temperature: |
-24°C (see table below) |
| |
|
| Maximum Pressure: |
16 Bar (see table below) |
| |
|
| Conform to: |
EN 1254-6 |
| |
|
| Approvals: |
WRAS Approved |
Temperature & Pressure:
Tube/Pipe used with
|
Min Temperature |
Max Temperature |
Copper
|
-24°C at 16 bar |
30°C at 16 bar |
65°C at 10 bar |
95°C at 6 bar |
PB/PEX
|
-20°C at 12 bar |
20°C at 12 bar |
65°C at 6 bar |
92°C at 3 bar |
